Send InquiryTube/Core/Cone Collapsing Tester
Tube/Core/Cone Collapsing Tester Specification
- Gas Pressure
- 6-8 kg/cm2
- Measuring Range
- 0–1000 kg
- Frequency
- 50 Hz
- Features
- Heavy-duty construction, overload protection, precise measurement
- Equipment Type
- Tube/Core/Cone Collapsing Tester
- Test Range
- 0 – 1000 kg
- Hardness
- Industrial-grade steel clamps and base
- Temperature
- 10°C to 40°C operating
- Display Type
- Digital LED
- Mounting Type
- Floor standing
- Power Supply
- 230 V AC, 50 Hz
- Application
- To determine the collapsing strength of cardboard tubes, cores and cones
- Resolution
- 0.1 kg
- Automation Grade
- Semi-Automatic
- Specimen Size
- 25 mm to 600 mm length, up to 100 mm diameter
- Response Time
- Instantaneous digital display
- Port Size
- Ø 25 mm
- Operating Voltage
- 230V AC
- Humidity
- Up to 85% RH
- Number of Specimens
- Single specimen at a time
- Interface Type
- RS232 (optional)
- Accuracy
- ±1% of full scale
- Max Height
- 600 mm
- Usage
- Paper tube, core, and cone strength testing
- Capacity
- 1000 kg
- Machine Weight
- Approx. 90 kg
- Test Speed
- 12.5 mm/min (typical)
- Test Width
- 100 mm
- Test Stroke
- Up to 200 mm
- Control Mode
- Microprocessor based
- Data Output
- Print or export via USB/RS232
- Material of Construction
- Mild steel with powder coated finish
- Memory Storage
- Up to 200 test results
- Operating System
- Touch keypad operation
- Safety Features
- Overtravel and overload cut-off
- Compliance
- Conforms to ASTM D7263, IS 7028
- Clamping System
- Hydraulic/manual clamping
- Accessories Supplied
- Set of different diameter specimen holders, calibration certificate
- Display Units
- kg/N selectable
About Tube/Core/Cone Collapsing Tester
Collapsing strength tester is designed in sucha manner that gradually increasing force is generated & applied on thesurface of carriers. The sharp collapsing point can be easily detected on adial and a suitable reading can be taken.
Capacity:1000 Kgf
Least Count:9.15
Accuracy:2%of full scale
Test AdoptersOD: Upto 100 mm
Air Pressure:6 Kg/cm2
Superior Build & Performance
Constructed with heavy-duty, powder-coated mild steel, this tester ensures exceptional longevity and stability during repeated use. The reliable hydraulic or manual clamping system secures specimens firmly, providing accurate, reproducible results across a broad spectrum of test conditions.
Advanced Control & Precision
Featuring a microprocessor-based control mode and a user-friendly touch keypad, the tester delivers precise measurements with an accuracy of 1% of full scale and a resolution of 0.1 kg. Safety is prioritized through overtravel and overload protection features, guaranteeing optimal operator and equipment safety.
Comprehensive Compliance & Data Handling
Designed in accordance with ASTM D7263 and IS 7028 standards, the tester supports extensive memory storage for up to 200 results. It allows seamless data transfer and printing, aiding in efficient test documentation and analysis for traceability and regulatory compliance.
FAQ's of Tube/Core/Cone Collapsing Tester:
Q: How does the Tube/Core/Cone Collapsing Tester operate?
A: This tester operates using a touch keypad, with microprocessor-based control for precision. You can select between hydraulic or manual clamping of the specimen and choose your display units in kg or Newtons. The digital LED shows instantaneous results, and all operations are safeguarded by overload and overtravel cut-off.Q: What materials and sizes can be tested on this machine?
A: The tester is designed for cardboard tubes, cores, and cones with length from 25 mm to 600 mm and up to 100 mm in diameter. It features interchangeable specimen holders to accommodate different sizes, making it versatile for varied testing requirements.Q: Where is the Tube/Core/Cone Collapsing Tester commonly used?
A: It is primarily used in paper tube and packaging manufacturing units, quality assurance labs, and research institutions to evaluate the structural strength of tubes, cores, and cones, ensuring product reliability and compliance with international standards.Q: What is the process for conducting a collapse strength test?
A: Simply place the specimen in the appropriate holder, secure it with the hydraulic/manual clamp, set the test parameters via the touch keypad, and start the test. The machine applies pressure at a set speed (typically 12.5 mm/min) until specimen failure, displaying results instantly and storing them in memory.Q: When should calibration and maintenance of the tester be performed?
A: To ensure ongoing accuracy, calibration should be carried out periodically as per industry guidelines or after high-usage intervals. The machine is delivered with a calibration certificate for initial setup. Maintenance involves checking clamps, ensuring proper hydraulic function, and cleaning the display and controls regularly.Q: What benefits does this tester provide manufacturers?
A: It offers precise, repeatable measurements, customizable data output, strong safety features, rugged construction, and compliance with international standards, optimizing process control and quality assurance in tube and core production.
More Products in Packaging Testing Instruments Category
Bopp Tape Shear Tester
Price 22000 INR / Unit
Minimum Order Quantity : 1 Unit
Application : Adhesive Tape Static Shear Strength Testing
Machine Weight : Approx. 15 kg
GANN Moisture Meter
Price 22000.00 INR / Unit
Minimum Order Quantity : 10 Units
Application : Wood/Paper/Plaster
Machine Weight : 15 kg Kilograms (kg)
Box Compression Tester
Price 225000.00 INR / Unit
Minimum Order Quantity : 1 Set
Application : Industrial
Machine Weight : 750 Kilograms (kg)
Color : Blue
Crush Tester
Price 125000.00 INR / Unit
Minimum Order Quantity : 1 Set
Application : Industrial
Machine Weight : 110 Kilograms (kg)
Color : White
Voltage : 220 Volt (v)
Quick Inquiry
Contact Details
GLOBAL ENGINEERING CORPORATION
GST : 08AHAPK0066H1ZN
GST : 08AHAPK0066H1ZN
H-166, Road No. 9, Riico Ind Area, Bindayaka,Jaipur - 302012, Rajasthan, India
Phone :View Number
Send Inquiry|
|
|
 |
GLOBAL ENGINEERING CORPORATION
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
